ATV630C22N4 - frequency converter
new in sealed original packaging
Normal price
83.589,00 kr
- plus taxes + shipping
- Fast delivery
- New & Sealed Original Items
- Manufacturer's warranty on all parts
- Access to stock items available worldwide
- Feedback within 24 hours
- Low stock - 2 items left
Do you need more than what we have in stock? Just ask us.
| Series | Altivar Process ATV600 |
|---|---|
| Product or component type | Variable speed drive |
| Product-specific application | Processes and tools |
| Short name of the device | ATV630 |
| Variant | Standard version |
| Product determination | Asynchronous motors Synchronous motors |
| EMC filter | Integrated with 50 m motor cable max corresponds to EN/IEC 61800-3 category C3 |
| Protection class (IP) | IP00 corresponds to IEC 61800-5-1 IP00 corresponds to IEC 60529 IP21 corresponds to IEC 61800-5-1 (with set VW3A9112) IP21 corresponds to IEC 60529 (with Set VW3A9112) |
| [UH,nom] Rated operating voltage | 380-480V |
| Cooling type | Forced convection |
| Mains frequency | 50 - 60 Hz - 5 - 5% |
| Nominal operating voltage [U,nom] | 380-480 V -15 - +10% |
| Motor power (kW) | 160 kW (heavy duty operation) 220 kW (normal operation) |
| Engine power (HP) | 350 hp normal operation 250 hp heavy duty operation |
| Mains power | 397 A at 380 V (normal operation) 324 A at 480 V (normal operation) 296 A at 380 V (heavy duty operation) 246 A at 480 V (heavy duty operation) |
| Mains short-circuit current Ik | 50 kA |
| Apparent power | 247 kVA at 480 V (normal operation) 187 kVA at 480 V (heavy duty operation) |
| Output rated current | 302 A at 2.5 kHz for heavy duty operation 427 A at 2.5 kHz for normal operation |
| Type of motor control asynchronous motor | Constant torque Variable torque Optimized torque operating mode |
| Control profile for synchronous motors | Permanent magnet motor Synchronous reluctance motor |
| Output frequency | 0.1…500 Hz |
| Rated clock frequency | 2.5 kHz |
| Clock frequency | 2.5 - 8 kHz with power derating factor 2 - 8 kHz adjustable |
| Security function | STO (Safe Torque Off) SIL 3 |
| Discrete input logic | 16 preset speeds |
| Communication protocol | Modbus TCP Ethernet Modbus, serial |
| Option card | Slot A: Communication module, Profibus DP V1 Slot A: Communication module, Profinet Slot A: Communication module, DeviceNet Slot A: Communication module, Modbus TCP/EtherNet/IP Slot A: Communication module, CANopen Daisy Chain RJ45 Slot A: Communication module, CANopen SUB-D 9 Slot A: Communication module, CANopen screw terminals Slot A/Slot B: Expansion module for digital and analog I/O Slot A/Slot B: Expansion module for output relay Slot A: Communication module, Ethernet IP/Modbus TCP/MD-Link Communication module, BACnet MS/TP Communication module, Ethernet Powerlink |
| Assembly mode | Surface mounting |
|---|---|
| maximum peak current | 453 A during 60 s (heavy duty operation) 470 A during 60 s (normal operation) |
| Number of network phases | 3 phases |
| Discrete output number | 0 |
| Digital output | Relay outputs R1A, R1B, R1C 250 V AC 3000 mA Relay outputs R1A, R1B, R1C 30 V DC 3000 mA Relay outputs R2A, R2C 250 V AC 5000 mA Re relay outputs R2A, R2C 30 V DC 5000 mA Relay outputs R3A, R3C 250 V AC 5000 mA Relay outputs R3A, R3C 30 V DC 5000 mA |
| Output voltage | <= Supply voltage |
| permissible temporary current gain | 1.1 x In during 60 s (normal operation) 1.5 x In during 60 s (heavy duty operation) |
| Slip compensation motor | Adjustable Automatic, independent of load Not available in permanent magnet motor control Can be deactivated |
| High and deceleration ramps | Linearly adjustable separately from 0.01-9999 s |
| Physical interface | Ethernet 2-wire RS 485 |
| Braking until standstill | By direct current supply |
| Protection functions | Thermal protection: motor Safe torque off: motor Motor phase failure: motor Thermal protection: drive Safe torque off: drive Overtemperature: drive Overcurrent protection between Output phases and ground: drive Output voltage overload: drive Short circuit protection: drive Motor phase failure: drive Overvoltage protection on the DC bus: drive Overvoltage protection supply voltage: drive Undervoltage detection mains voltage: drive Phase failure detection of the supply voltage: drive Overspeed: drive Interruption detection in the control circuit: drive |
| Transmission speed | 10, 100 Mbits 4800,9600,19200 bps, 38.4 Kbps |
| Frequency resolution | Display unit: 0.1 Hz Analog input: 0.012/50 Hz |
| Transmission frame | RTU |
| electrical connection | Control: removable screw terminals 0.5 - 1.5 mm²/AWG 20 - AWG 16 Cable side: screw terminal 2 x 150 mm²/2 x 350 kcmil Motor: screw terminal 2 x 150 mm²/ 2 x 350 kcmil |
| Connector type | RJ45 (on the decentralized graphical terminal) for Ethernet/Modbus TCP RJ45 (on the decentralized graphical terminal) for Modbus, serial |
| Data format | 8 bits, adjustable to odd, even or no parity |
| Polarization type | No impedance |
| Exchange mode | Half duplex, full duplex, auto-negotiation Ethernet/Modbus TCP |
| Number of addresses | 1…247 for Modbus, serial |
| Access method | Slave Modbus TCP |
| Supply | External power supply for digital inputs: 24 V DC (19…30 V), <1.25 mA, protection type: overload and short circuit protection Internal supply for setpoint potentiometer (1 to 10 kOhm): 10.5 V DC +/-5%, <10 mA, protection type: overload and short circuit protection Internal power supply for digital inputs and STO: 24 V DC (21…27 V), <200 mA, protection type: overload and short circuit protection |
| Local signaling | 3 LEDs for local diagnostics 3 LEDs (two-color) for status of integrated communication 4 LEDs (two-color) for status of communication module 1 LED (red) for presence of voltage |
| Width | 440mm |
| Height | 1195mm |
| Depth | 380mm |
| Product weight | 172kg |
