Name: X20DO8332 - Digital output module
Brand: B&R Industrial Automation GmbH
Price: 219.85 EUR
Availability: InStock

new in sealed original packaging

€219,85

plus taxes + shipping

Crowd

Fast delivery

New & Sealed Original Items

Manufacturer's warranty on all parts

Access to stock items available worldwide

Feedback within 24 hours

In stock
Inventory on the way

Do you need more than what we have in stock? Just ask us.

DESCRIPTION:

8 digital outputs with 2 A
Source circuit
1-wire technology
Supply feed integrated in the module
Integrated output protection

The module is equipped with 8 outputs in 1-wire technology. The rated output current is 2 A.

The output supply is fed directly into the module. An additional feed module is therefore not necessary. There is no connection from the module to the I/O supply potential on the bus module.

Short description

I/O module	8 digital outputs 24 VDC in 1-wire technology

General

B&R ID code	0x1B9D
Status displays	I/O function per channel, operating status, module status
Diagnosis
Module Run/Error	Yes, via status LED and SW status
Outputs	Yes, via status LED and SW status (output error status)
Supply voltage monitoring	Yes, via SW status
Power consumption
Bus	0.22W
I/O internal	-
I/O external	0.92W
Additional power loss due to actuators (resistive) [W]	+2.24
Approvals
CE	Yes
UKCA	Yes
ATEX	Zone 2, II 3G Ex nA nC IIA T5 Gc IP20, Ta (see X20 user manual) FTZÚ 09 ATEX 0083X
UL	cULus E115267 Industrial Control Equipment
HazLoc	cCSAus 244665 Process Control Equipment for Hazardous Locations Class I, Division 2, Groups ABCD, T5
DNV	Temperature: B(0 to 55 °C) Humidity: B(up to 100%) Vibration: B(4 g) EMC: B(bridge and open deck)
LR	ENV1
KR	Yes
ABS	Yes
BV	EC33B Temperature: 5 - 55 °C Vibration: 4 g EMC: Bridge and open deck
EAC	Yes
KC	Yes

Digital outputs

Execution	FET plus switching
Number of output groups	2
Nominal voltage	24 VDC
Switching voltage	24 VDC -15% / +20%
Output rated current	2 A
Total rated current
Per group	4 A
Per module	8 A
Connection technology	1-wire technology
Output circuit	Source
Output protection	Thermal shutdown in the event of overcurrent or short circuit (see value "Short-circuit peak current") Internal freewheeling diode for switching ind. Loads (see section "Switching inductive loads") Reverse polarity protection of the supply voltage
Actuator supply
Infeed	External
Backup	Required backup fuse max.T 10 A
Diagnostic status	Output monitoring with delay 10 ms
Leakage current when output is switched off	5 µA
R_DS(on)	140 mΩ
Short-circuit peak current	<12 A
Switch-on during overload shutdown or short-circuit shutdown	approx. 10 ms (depending on the module temperature)
Switching delay
0 → 1	<300 µs
1 → 0	<300 µs
Switching frequency
resistive load	max. 500Hz
inductive load	See section "Switching inductive loads"
Brake voltage when switching off inductive loads	typ. 50VDC
Isolation voltage between channel and bus	500 V_rms
Additional functions	To increase the output current, the outputs can be connected in parallel

Electrical properties

Potential separation	Channel to bus and I/O supply separated

Using conditions

Installation position
horizontal	Yes
vertical	Yes
Installation altitude above sea level (sea level)
0 to 2000 m	No restriction
>2000 m	Reduction of the ambient temperature by 0.5°C per 100 m
Protection class according to EN 60529	IP20

Ambient Conditions

Temperature
Operation
horizontal installation position	-25 to 60°C
vertical installation position	-25 to 50°C
Derating	See section "Derating"
Storage	-40 to 85°C
Transportation	-40 to 85°C
Humidity
Operation	5 to 95%, non-condensing
Storage	5 to 95%, non-condensing
Transportation	5 to 95%, non-condensing

Mechanical properties

Note	Order field terminal 1x X20TB12 separately Order bus module 1x X20BM11 separately
Grid dimension	12.5 ^+0.2mm