ATV930D11N4 - frequency converter
Der Frequenzumrichter ATV930D11N4 von Schneider Electric ist ein leistungsfähiges Gerät zur Steuerung von Drehstrommotoren in industriellen Anwendungen. Er wird zur präzisen Regelung von Drehzahl und Drehmoment eingesetzt und zeichnet sich durch seine Nennleistung von 11 kW, eine Betriebsspannung von 400-480 V und ein integriertes Bremsmodul aus. Besondere Merkmale sind seine hohe Energieeffizienz und Zuverlässigkeit. Bei der Installation sollte auf die richtige Belüftung und Umgebungstemperatur geachtet werden, um optimale Leistung sicherzustellen.
neu in versiegelter OVP
Normal price
9 073 kr
- zzgl. Steuern + Versand
- 3 - 5 Werktage Lieferzeit
- Neue & versiegelte Originalartikel
- Herstellergarantie auf alle Teile
- Zugriff auf weltweit verfügbare Lagerartikel
- Rückmeldung innerhalb von 24h
- Low stock - 6 items left
Do you need more than what we have in stock? Just ask us.
| Series | Altivar Process ATV900 |
|---|---|
| Device Application | Industrial application |
| Product or component type | Variable speed drive |
| Product determination | Asynchronous motors Synchronous motors |
| Product-specific application | Process for industrial |
| Variant | Standard version With brake chopper |
| Number of network phases | 3 phases |
| Mounting mode | Surface mounting |
| Communication protocol | EtherNet/IP Modbus, serial Modbus TCP |
| Nominal operating voltage [U,nom] | 380-480 V -15 - +10% |
| Motor power (kW) | 11.0 kW for normal operation 7.5 kW for heavy duty operation |
| Output rated current | 23.5 A at 4 kHz for normal operation 16.5 A at 4 kHz for heavy duty operation |
| EMC filter | Integrated With EMC plate option |
| IP protection class | IP21 |
| Protection class | UL Type 1 |
| optional module | Slot A: Communication module for Profibus DP V1 Slot A: Communication module for Profinet Slot A: Communication module for DeviceNet Slot A: Communication module for EtherCAT Slot A: Communication module for CANopen Daisy Chain RJ45 Slot A: Communication module for CANopen SUB-D 9 Slot A: Communication module for CANopen screw terminals Slot A/Slot B/Slot C: Expansion module for digital and analog I/O Slot A/Slot B/Slot C: Expansion module for output relay Slot B: 5/12 V digital encoder interface module Slot B: Analog encoder interface module Slot B: Interface module for encoder with actual value feedback Communication module for Ethernet Powerlink |
| Number of preset speeds | 16 preset speeds |
| Type of motor control asynchronous motor | Variable torque Optimized torque operating mode Constant torque |
| Control profile for synchronous motors | Permanent magnet motor Synchronous reluctance motor |
| max.Output frequency | 599 Hz |
| Clock frequency | 2 - 16 kHz adjustable 4 - 16 kHz with derating factor |
| Rated clock frequency | 4 kHz |
| Mains power | 19.8 A at 380 V (normal operation) 14.1 A at 380 V (heavy duty operation) 17.0 A at 480 V (normal operation) 12.5 A at 480V (heavy duty) |
| Apparent power | 14.1 kVA at 480 V (normal operation) 10.4 kVA at 480 V (heavy duty operation) |
| maximum peak current | 28.2 A during 60 s (normal operation) 24.8 A during 60 s (heavy duty operation) |
| Network frequency | 50 - 60 Hz |
| Mains short-circuit current Ik | 50 kA |
| Discrete input number | 10 |
|---|---|
| Digital input | DI1 - DI8 programmable, 24 V DC (<= 30 V), impedance: 3.5 kOhm DI7, DI8 programmable as pulse input: 0…30 kHz, 24 V DC (<= 30 V ) STOA, STOB Safe Torque Off (safe torque off), 24 V DC (<= 30 V), impedance: > 2.2 kOhm |
| Discrete output number | 2 |
| Digital output | Logic output DQ+ 0…1 kHz <= 30 V DC 100 mA Programmable as pulse output DQ+ 0…30 kHz <= 30 V DC 20 mA Logic output DQ- 0…1 kHz <= 30 V DC 100 mA |
| Number of analog inputs | 3 |
| Measuring inputs | AI1, AI2, AI3 software-configurable voltage: 0 - 10 V DC, impedance: 30 kOhm, resolution 12 bits AI1, AI2, AI3 software-configurable current: 0-20 mA/4-20 mA, impedance : 250 Ohm, resolution 12 bits |
| Number of analog outputs | 2 |
| Type of analogue output | Software-configurable voltage AQ1, AQ2: 0 - 10 V DC resistance 470 ohms, resolution 10 bits Software-configurable current AQ1, AQ2: 0 - 20 mA resistance 500 ohms, resolution 10 bits |
| Relay output number | 3 |
| Output type of the relay | Configurable relay logic R1: fault relay normally open/closed electrical life 100,000 cycles Configurable relay logic R2: sequence relay normally open (S) electrical service life 1000,000 cycles Configurable relay logic R3: sequence relay normally open ( S) electrical lifespan 1000000 cycles |
| maximum switching current | Relay output R1 on ohmic load, cos phi = 1: 3 A at 250 V AC Relay output R1 on ohmic load, cos phi = 1: 3 A at 30 V DC Relay output R1 on inductive Load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC Relay output R1 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC Relay output R2, R3 on ohmic load, cos phi = 1: 5 A at 250 V AC Relay output R2, R3 on ohmic load, cos phi = 1: 5 A at 30 V DC Relay output R2 , R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC Relay output R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms : 2 A at 30 V DC |
| minimum switching current | Relay output R1, R2, R3: 5 mA at 24 V DC |
| Physical interface | Ethernet 2-wire RS 485 |
| Connection type | 2 RJ45 1 RJ45 |
| Access method | Slave Modbus TCP |
| Transmission speed | 10, 100 Mbits 4.8 kbps 9,600 bit/s 19200 bit/s |
| Transmission frame | RTU |
| Number of addresses | 1…247 |
| Data format | 8 bits, adjustable to odd, even or no parity |
| Polarization type | No impedance |
| 4 quadrant operation possible | Correct |
| High and deceleration ramps | Linearly adjustable separately from 0.01-9999 s |
| Slip compensation motor | Adjustable Automatic, independent of load Can be deactivated Not available in permanent magnet motor control |
| Brake to standstill | By direct current supply |
| Brake chopper integrated | Correct |
| Max.Input current | 19.8A |
| Maximum output voltage | 480.0V |
| Relative symmetric network frequency tolerance | 5% |
| Base load current at high overload | 16.5A |
| Base load current at low overload | 23.5A |
| Power loss in W | Fanless with convection: 51 W at 380 V, switching frequency 4 kHz Forced convection: 255 W at 380 V, switching frequency 4 kHz |
| with Safely Limited Speed (SLS) safety function | Correct |
| with safety function Safe brake management (SBC/SBT) | Correct |
| with Safe Operating Stop (SOS) safety function | False |
| with Safe Position (SP) safety function | False |
| with safety function Safe programmable logic | False |
| with Safe Speed Monitor (SSM) safety function | False |
| with safety function Safe Stop 1 (SS1) | Correct |
| with safety function Safe Stop 2 (SS2) | False |
| with safety function Safe torque off (STO) | Correct |
| with Safely Limited Position (SLP) safety function | False |
| with Safe Direction (SDI) safety function | False |
| Protection functions | Thermal protection: motor Safe torque off: motor Motor phase failure: motor Thermal protection: drive Safe torque off: drive Overtemperature: drive Overcurrent protection between Output phases and ground: drive Output voltage overload: drive Short circuit protection: drive Motor phase failure: drive Overvoltage protection on the DC bus: drive Overvoltage protection supply voltage: drive Undervoltage detection mains voltage: drive Phase failure detection of the supply voltage: drive Overspeed: drive Interruption detection in the control circuit: drive |
| Quantity per set | 1 |
| Width | 171mm |
| Height | 409mm |
| Depth | 236mm |
| Product weight | 7.7kg |